Description

AMANN GIRRBACH - MoguCera C Disc 10mm - # 138110

Description:

With the introduction of the Ceramill Matik, AMANN GIRRBACH offers a milling machine for processing hard metal CoCr blanks. We recommend the exclusive use of CoCr blanks validated by AMANN GIRRBACH with the Ceramill Matik, as the MoguCera C Disc from Scheftner Dental was tested and validated on the Ceramill Matik. This ensures a safe process and consistently good results when using the hard metal CoCr blank. The product characteristics of the MoguCera C Disc are virtually identical to those of Ceramill Sintron. This ensures a known and safe process for the further processing of the MoguCera C Disc. Due to the excellent metal-ceramic bond, the MoguCera C Disc can also be used for frames for subsequent ceramic veneering.

Validated process when using the MoguCera C Disc on the Ceramill Matik

Excellent metal-ceramic bond for possible ceramic veneering of the CoCr restoration

Excellent strength values, bonding strength and biocompatibility

Highest process safety due to homogeneous and distortion-free frames

Crowns and bridges, fully anatomically and anatomically reduced

Telescopes

Multi-pontic screw-retained constructions on Ti-bases

Individual abutments on Ti-bases

Anatomically reduced and fully anatomical crown and bridge frameworks in the anterior and posterior region.

Data & Composition

Tensile Strength	597 MPa
Density	8,3 g/cm3
Vickers Hardness	288HV10
Elongation at rupture	12%
Yield strength (Rp 0.2)	413 MPa
E-modulus	206 GPa
CTE (20-500°C)	14.5 * 10-6K-1
CTE (20-600°C)	14.8 * 10-6K-14
Laser-weldable	Yes