• 95mm ZIRCONIA DISCS MONOLAYER 95mm ZIRCONIA DISCS MONOLAYER Mono by DIGITECH

    95mm ZIRCONIA Discs CAD/CAM for ZIRKINZAHN

    Characterisics:
    * First grade Zirconia powder
    * Shrinkage adjusted for 20% -
    * Compensation 1.25
    Physical Qualities:
    * Bending Strength:
    HS High Strengh 1400 Mpa
    ST Super Translucent 1200 Mpa
    AT Anterior Translucency 600 Mpa ( TT Total Translucency )
    * Vickers Hardness: 12.8 Gpa

    Colors:
    * Our Zirconia blocks, are Standard LL0.5 .
    * For darker shades ECCO liquid Coloring is available in the following: *LL1
    *LL2 *LL3 *LL4 *LL5 as the darkest shade.
    * Coloring for Full contour is also available in 16 Vita shades

    Firing Chart:
    * Starting temperature: Room Temperature
    * Temperature Heating rate 4 Celcius per minute
    * Sinterization temperature
    HS and ST 1530 Celsius 2 hours
    AT  1450 Celcius 2 hours
    * Temperature Coling Rate 4 Celcius per minute
    * Total Cycle time: 16 hours .Then open door, don?t forget to decontaminate your sinter oven once a week, or at least once a month. This advice is for every sinter oven in the market, regardless of brand name, or origin.

    #Usdd95

    #ZirkonZahn

    ZIRKONZAHN is a trademark of ZIRKONZAHN GMBH

1 - 14 of 14 results