J MORITA - Lubrina 2 Automatic Handpiece Lubrication System - # 24K325ENG
9172_f.jpg)
9171_f.jpg)
9170_f.jpg)
Description
🗹 Automatic purging and lubrication of a wide variety of equipment
🗹 New clean air-blow system
🗹 Reduced maintenance time and OIL consumption
🗹 Up to 4 handpieces/attachments may be cleaned in the same cycle
🗹 Built-in chuck maintenance system for MORITA instruments
🗹 Compatible with 4-hole, 5-hole, and 6-pin connections
🗹 Unique dual lubrication system
Fast and clean operation, plus compatibility with multiple brands of spray Lubricant
Lubrina 2 automatically performs maintenance (lubrication and Cleaning) of handpieces and other equipment which are essential for daily practice. Because the lubrication amount and service time suitable for each HANDPIECE are programmed into Lubrina 2, it can automatically perform maintenance of up to four handpieces in a short time. The clean air-blow system implements lubrication and Cleaning of the inside of the HANDPIECE thoroughly, and provides stable maintenance without variations by staff which can occur during manual lubrication. Lubrina 2 accepts multiple brands of spray Lubricant.
Features
Seamless Auto-Maintenance
• Cleans one turbine in approximately 20 seconds
• OIL usage amount is reduced to 1/4
• Faster maintenance with excellent cost savings
Since the air-blow system can remove residual water completely using clean air, the efficiency of lubrication is enhanced with OIL usage only 1/4 of that compared to manual lubrication. Daily maintenance cost is therefore reduced. In addition, the system can remove surplus OIL effectively, allowing maintenance in a short time.
HANDPIECE and spray compatibility
Example: One turbine and contra angle by MORITA and one turbine and contra angle by another manufacturer.
By replacing the coupling, Lubrina 2 facilitates the maintenance of Tri Auto ZX2 and Root ZX II contra angles, air driven handpieces (ISO 9168/Type 3 joint) as well as all other contra-angles and straight handpieces (ISO 3964/E-Type joint). Lubrina is compatible with 4-hole, 5-hole, and 6-pin connections. With its dual lubrication system, one or two different brands of spray may be used in the same cycle. Several brands of spray are compatible by using an optional spray holder adapter.
Clean Air-Blow System & Other Ease of Use Features
Double-conduit design achieves clean air
By employing the dual solenoid valves and clean air dedicated conduit, the system can supply clean air without a mix of OIL. During the water removal process before lubrication, the system removes the water in the head which maximizes lubrication results. During idling after lubrication, the surplus OIL can be effectively removed by clean air.
Comparision of Lubrina 2 with an conventional product
Lubrina 2 (Clean Air-Blow System)
Conventional product*
Additional benefits and ease of use features of Lubrina 2
Easy chuck maintenance