Description

ADS - Perfect EZ GLAZE Paste - 3grs
Glazes Powder/Pastes
# 115024 - Mfg # EZ 103-1

Features:
* Is a ready-to-use premixed GLAZE for specifically designed for zirconia and lithium disilicate all-ceramic restorations.
* It is a smooth GLAZE that allows the restoration to provide a beautiful GLAZE in one firing.

Description:
* The pre-mix provides the exact consistency for every application.
* Perfect Match EZ GLAZE Paste is wear resistant
* Creates a protective coat and may be applied to polished zirconia.
* Unlike other Paste Glazes, this one will not clump, get bumpy or leave streaks.
* It provides a smooth GLAZE every time allowing ceramist to achieve a perfect GLAZE without losing the surface anatomy on the restoration.

Instructions for Glazing:
1- Apply thin even layer of the GLAZE Paste with a fine brush. Avoid heavy applications or pools.
2- Pre-dry at 400 OC in the furnace for 3 minutes
3- Raise temperature at 40 OC/minute to 780 OC/minute, and hold for 30 seconds (no vacuum).
4- Allow to cool normally. Holding longer or firing slightly hotter (i.e. 810 OC) can give a higher gloss.

Quantity: 3grsam jar

authorized American Dental Supply dealer in US