#2010DCU HANDLER Two Stage Digital Curing Unit. 8 flask capacity, digital control panel - #2010DCU

2010DCU TWO-STAGE DIGITAL Curing UNIT
The 2010DCU Denture Curing Unit is a sophisticated Curing unit featuring:

• 2-Stage Curing unit with a digital control panel on which sequences of polymerizing times and temperatures can be programmed as required by user.
• The time of each step can be set between 0 and 999 minutes. The end temperatures at each plateau can be regulated by the user between 32oF and 210oF (0oC and 99oC).
• To enable the user to see the actual program status at all times, the Curing unit has a synoptic display.
• Programming. It is extremely easy to program a heating sequence for the water in the tank.
• Low maintenance and easy cleaning.

The 2010DCU Denture Curing Unit has a circuit breaker (fuse in power inlet) that protects the machine against electric overloads.
Unit Dimension: 13.8” H x 16.5” W x 14.9” D (350mm x 420mm x 380mm)
Tank Dimension: 11” H x 10” W x 10” D (280mm x 255mm x 255mm)
Weight: 45 lbs [17kg]
Power Supply: 115V, 50/60Hz, 13A
Consumption: 1500 W
Available in 230V/50/60Hz, 6 Amp – Model 2010DCU-E

Instructions

P2010DCU-01 Electric Heating Element
P2010DCU-02 Mini Bus Fuse 16 Amp, 250 Volt
P2010DCU-03 Mini Bus Fuse Holder
P2010DCU-04 Circuit Board
P2010DCU-05 Thermocouple
P2010DCU-06 Cord Set 2010DCU – 110V
P2010DCU-07 Triac Bta40700B
P2010DCU-08 Socket Pwr Entry 1 Pole Screw