ATTRITOR - VHF Disilicate Sinter Diamond CadCam Bur 0.6mm BALL END for disilicate and feldspar - WET MILLINGfor K5, S1, S2, and R5
Description
VHF VHF DIAM 0.6MM BALL
Description
ATTRITOR VHF Disilicate Diamonds are galvano-bonded diamond Burs sized for the wet-milling of lithium disilicate (eMax), ZLS and glass-ceramic blocks on VHF K-series wet-milling platforms. The diamond cutting geometry is engineered for the brittle ceramic substrate — gentle, controlled material removal without micro-fracture.
- ✓Galvano-bonded diamond cutting media — gentle controlled removal of brittle ceramic
- ✓Working diameters 0.6, 1.0, 2.4, 2.6 mm
- ✓BALL and flat-end geometries — crown contour and inlay floor
- ✓Indicated for lithium disilicate (eMax), ZLS, feldspathic, glass-ceramic
- ✓Compatible with VHF K-series wet-mill platforms
Materials & Construction
Cutting media: galvano-bonded diamond grit, sized for ceramic substrate.
Operating Speed & Use Guidance
Operate at the VHF K-series wet-mill spindle's published RPM — typically lower than dry-mill operations.
Maintain coolant flow — diamond cuts ceramic best with continuous water lubrication.
Sterilization & Handling
- ✓Rinse off ceramic slurry after each milled restoration
- ✓Inspect diamond face after each milling block
Technical Specifications
| Brand | ATTRITOR |
|---|---|
| Brand Model | VHF |
| Sub-Model | Wet |
| USDD SKU | 417086 |
| Mfg Item # | VHF DIAM 0.6MM BALL |
| Vendor Item # | VHF DIAM 0.6MM BALL |
| Package | 1pk |
| Diameter | 0.6mm |
| Length | 40mm |
| Style | 3mm shank |
| Features | WET Milling |
| Net Weight | 20 g |
| Shipping Weight | 40 g |
| Sterilization | Autoclavable to 134 °C per manufacturer protocol |
Videos
Talk to a USDD Specialist
A USDD expert will reach out within 24 hours with pricing and a tailored recommendation for VHF VHF DIAM 0.6MM BALL.
By submitting you agree to be contacted by US Dental Depot.